This post is in progress and will forever need updating.
IF YOU ARE ABLE TO HELP PROVIDE INFORMATION, PHOTOS, DETAILS, OR PERHAPS EVEN HELP DO RESEARCH USING THE LINKS AT THE BOTTOM OF THIS FIRST POST IN SPOILER TAGS AND REPORT BACK, IT IS MUCH APPRECIATED.
It's taken me a lot of time to gather this information up so far, put it in a neat format, find photos and resize etc. If you can volunteer to help for the good of all arcade stick lovers and SRK TT, please do.
First off, I've gotta shout out @Superking for the original post back in July 2005 and for the work he did in keeping track of info and data on the Hori RAP sticks at least up until the middle of the PS2 gen and some of the PS3/360 gen.
Below you'll see the info he organized reworked in a new format with more info and photos.
Original thread (39 pages of topic from July 2005 to mostly April 2012)
http://forums.shoryuken.com/discussion/13083/hori-real-arcade-pro-faq-for-all-versions/p1
Shoutouts to those who've helped provide information on this updated list that deserve credit for their contributions:
@hibachifinal @VirtualCosmic @Darksakul @NENDO @Digital- @quashpdarkman @N10248 @anzhar @Batsu
If you have general arcade stick questions, please ask in the "Absolute Question and Answer Thread v.3 (ASK YOUR QUESTIONS HERE!)" thread
http://forums.shoryuken.com/discussion/194283/absolute-question-and-answer-thread-v-3-ask-your-questions-here
If you desire information on other arcade sticks that are not listed here or want suggestions on what to buy, please visit the "What Stick/Controller Should I Buy? Read the Guide on Pg 1 Before Posting." thread
http://forums.shoryuken.com/discussion/137321/what-stick-controller-should-i-buy-read-the-guide-on-pg-1-before-posting/p1
There will be no tier list, and there will likely not be a "I SUGGEST YOU BUY ________ ARCADE STICK" info.
This is information for you to use to your advantage to make an independent decision based on what features you may or may not enjoy.
PLEASE PLEASE PLEASE do not come in to this thread and just ask "Which one should I buy?".
Use knowledge below to grow, think, and learn.
Listed in order of console:
Playstation 1 / Playstation 2
![Hori-RAP1-Mirror-01.jpg]()
Hori RAP1
=Hori Real Arcade Pro (Mirror Finish)
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (2.6 kg or 5.7 lbs)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Mirror finish looks nice but is easily susceptible to scratches and fingerprints
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF-TP-8Y-SK
=Mounting a Seimitsu LS-32 is possible with modification, previous documentation lost to GeoCities
Buttons-
-Hori stock buttons
PCB-
=NEED INFO/DETAILS
Wiring-
+Quick disconnects for buttons allowing easy swap
=Unsure if joystick connection is 5 pin or soldered on individual microswitches
Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
![Hori-CFJ-01.jpg]()
Hori RAP CFJ
=Hori Capcom Fighting Jam
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF-TP-8Y-SK
Buttons-
-Hori stock buttons
PCB-
=NEED INFO/DETAILS
Wiring-
+Quick disconnects for buttons allowing easy swap
=Unsure if joystick connection is 5 pin or soldered on individual microswitches
USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
![Hori-RAP1-Orange-01.jpg]()
Hori RAP1
-Hori Real Arcade Pro Orange Amazon Exclusive
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF-TP-8Y-SK
Buttons-
-Hori stock buttons
PCB-
=NEED INFO/DETAILS
Wiring-
=NEED INFO/DETAILS
USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment
Unanswered Questions-
=What is the official title for this arcade stick from Hori?
=TO EDIT
![Hori-RAP1SA-01.jpg]()
Hori RAP1 SA
=Hori Real Arcade Pro Special Addition
=Special Addition also can be viewed as Hori's way of saying Sanwa (SA)
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
+Easy Top Panel access through Hex key
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF-TP-8Y-SK
Buttons-
-Sanwa OBSF-30RG and OBSF-24 in custom Vermilion color
PCB-
=NEED INFO/DETAILS
Wiring-
=NEED INFO/DETAILS
USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
![Hori-RAP1SE-01.jpg]()
Hori RAP1 SE
=Hori Real Arcade Pro Special Edition
=Special Edition also can be viewed as Hori's way of saying Seimitsu (SE)
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
+Easy Top Panel access through Hex key
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Seimitsu LS-32-01
Buttons-
-Seimitsu PS-14-GX
PCB-
=NEED INFO/DETAILS
Wiring-
=NEED INFO/DETAILS
USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
![Hori-AH1-01.jpg]()
Hori AH1
=Hori Arcana Heart Arcade Stick
(unsure of official title since it's difficult to find data on now)
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (___________)
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
+Easy Top Panel access through Hex key
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF-TP-8Y-SK
Buttons-
-Hori stock buttons
PCB-
=NEED INFO/DETAILS
Wiring-
-Buttons mounted on PCB instead of having own quick disconnects
USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
![Hori-AH2-01.jpg]()
Hori AH2
=Hori Arcana Heart 2 Arcade Stick
(unsure of official title since it's difficult to find data on now)
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (___________)
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
+Easy Top Panel access through Hex key
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
=NEED INFO/DETAILS
Buttons-
=NEED INFO/DETAILS
PCB-
=NEED INFO/DETAILS
Wiring-
-Buttons mounted on PCB instead of having own quick disconnects
USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
![Hori-FUC-01.jpg]()
Hori FUC-LE
=Hori Real Arcade Pro Stick Fate/Unlimited Codes Limited Edition
(unsure of official title since it's difficult to find data on now)
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (___________)
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
=NEED INFO/DETAILS
Buttons-
=NEED INFO/DETAILS
PCB-
=NEED INFO/DETAILS
Wiring-
=NEED INFO/DETAILS
USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
![Hori-RAP2-01.jpg]()
Hori RAP2
=Hori Real Arcade Pro 2
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF-TP-8Y-SK
Buttons-
-Hori stock buttons
PCB-
=NEED INFO/DETAILS
Wiring-
=NEED INFO/DETAILS
USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
![Hori-RAP2SA-01.jpg]()
Hori RAP2 SA
=Hori Real Arcade Pro 2 Special Addition
=Special Addition also can be viewed as Hori's way of saying Sanwa (SA)
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
+Easy Top Panel access through Hex key
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF-TP-8Y-SK
Buttons-
-Sanwa OBSF-30 (Blue) and OBSF-24 (Dark Hai specifically made for this stick)
PCB-
=NEED INFO/DETAILS
Wiring-
=NEED INFO/DETAILS
USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
![Hori-SCIII-01.jpg]()
HRAP SCIII
=Hori Real Arcade Pro Soul Calibur III
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
=NEED INFO/DETAILS
Buttons-
-Hori stock buttons
PCB-
=NEED INFO/DETAILS
Wiring-
-Buttons mounted on PCB instead of having own quick disconnects
USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
![Hori-Tekken5JP-01.jpg]()
HRAP Tekken 5 JP
=Hori Real Arcade Pro Tekken 5
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF-TP-8Y-SK
Buttons-
-Hori stock buttons
PCB-
=NEED INFO/DETAILS
Wiring-
=NEED INFO/DETAILS
USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
![Hori-Tekken5US-01.jpg]()
HRAP Tekken 5 10th Anniversary
=Hori Real Arcade Pro Tekken 10th Anniversary
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
-Hori
Buttons-
-Hori stock buttons
PCB-
=NEED INFO/DETAILS
Wiring-
=NEED INFO/DETAILS
USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
Playstation 3
![Hori-RAP3-01.jpg]()
HRAP3
=Hori Real Arcade Pro 3
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF-TP-8Y-SK
Buttons-
-Hori stock buttons
PCB-
=NEED INFO/DETAILS
Wiring-
=NEED INFO/DETAILS
USB Cable-
=PS3 cable exits base on back
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
![Hori-RAP3SA-01.jpg]()
HRAP3 SA
=Hori Real Arcade Pro. SA
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight ___________
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF-TP-8Y-SK
Buttons-
+Sanwa OBSF-30, OBSF-24
PCB-
=NEED INFO/DETAILS
Wiring-
=NEED INFO/DETAILS
USB Cable-
=PS3 cable exits base on back
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
![Hori-RAP3-SE-01.jpg]()
Hori RAP 3 SE
=Hori Real Arcade Pro. 3 SE
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
Metal Panels-
+Both top and bottom metal panels
+Easy Top Panel access through Hex key
+Universal Joystick mount
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Seimtisu LS-32-01
Buttons-
+Seimitsu PS-14-G, PS-14-D
PCB-
=same as HRAP 3
Wiring-
+Buttons are quick disconnects
+5-pin Joystick Harness
USB Cable-
=USB 2.0
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
![Hori-RAP3AA-01.jpg]()
Hori RAP 3 Amazon JP
=Hori Real Arcade Pro Amazon.co.jp Edition
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
Metal Panels-
+Both top and bottom metal panels
+Easy Top Panel access through Hex key
+Universal Joystick mount
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF-TP-8Y-SK
Buttons-
-HORI stock buttons
PCB-
=same as HRAP 3
Wiring-
+Buttons are quick disconnects
+5-pin Joystick Harness
USB Cable-
=USB 2.0
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
![ps3_rapn3sa_us_01.jpg]()
Hori RAP N3 SA
=Hori Real Arcade Pro N3-SA
Release date: 2014
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=Unique door over recessed mounting for Start button slides into pocket within case when opened.
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Top panel bolts can be removed with Allen key for easy installation of plexi and art.
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF
Buttons-
+Sanwa OBSF-30
PCB-
=Common ground
Wiring-
=Buttons have quick disconnect wiring
=Joystick has 5-pin JST connector
USB Cable-
=USB 2.0
=Plastic door cord compartment
![Hori-RAPBlaz-01.jpg]()
Hori RAP 3 BlazBlue
=Hori Real Arcade Pro. 3 BlazBlue
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
+Exclusive blue case
Metal Panels-
+Both top and bottom metal panels
-Two-point Joystick Mount (Seimtisu VF/JLF Wings)
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF-TP-8Y-SK
Buttons-
-HORI stock buttons
PCB-
=same as HRAP 3
Wiring-
-Buttons are PCB Mounted
+5-pin Joystick Harness
USB Cable-
=USB 2.0
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
Need PS3 version for photo
![DOA5.png]()
Hori RAP Dead or Alive 5
=Hori Real Arcade Dead or Alive 5
Release date: 2012
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
= Unique door over recessed mounting for Start button slides into pocket within case when opened.
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Top panel bolts can be removed with Allen key for easy installation of plexi and art.
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF
Buttons-
+Sanwa OBSF-30
PCB-
=Both common ground
Wiring-
=Buttons have quick disconnect wiring
=Joystick has 5-pin JST connector
USB Cable-
=USB 2.0
=Plastic door cord compartment
![gundam-extreme-vs-arcade-stick-limited-edition.jpg]()
Hori RAP Mobile Suit Gundam: Extreme V.S.
=Hori Real Arcade Mobile Suit Gundam: Extreme V.S.
Release date: 2011
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=Unique door over recessed mounting for Start button slides into pocket within case when opened.
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Top panel bolts can be removed with Allen key for easy installation of plexi and art.
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF-TP-8Y-SK with dark blue balltop
Buttons-
+Sanwa OBSF-30
PCB-
=Common ground
Wiring-
=Buttons have quick disconnect wiring
=Joystick has 5-pin JST connector
USB Cable-
=USB 2.0
=Plastic door cord compartment
![full%20boost.jpg]()
Hori RAP Mobile Suit Gundam: Extreme V.S. Full Boost
=Hori Real Arcade Pro AX S+G
Release date: 2014
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=Unique door over recessed mounting for Start button slides into pocket within case when opened.
=Full Boost version is the only version with transparent door over Start button.
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Top panel bolts can be removed with Allen key for easy installation of plexi and art.
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF
Buttons-
+Sanwa OBSF-30
PCB-
=Common ground
Wiring-
=Buttons have quick disconnect wiring
=Joystick has 5-pin JST connector
USB Cable-
=USB 2.0
=Plastic doored cord compartment
![Hori-SFIV-01.jpg]()
Hori SFIV
=Hori Street Fighter IV Arcade Stick
(unsure if this is "official" title)
(Does not have RAP in the name but is same build/parts)
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=Black case
Metal Panels-
+Both top and bottom metal panels
-Two-point Joystick Mount (Seimtisu VF/JLF Wings)
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Red/Black theme with Ryu & Ken
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF-TP-8Y-SK with Red Balltop
Buttons-
-HORI stock buttons (Red)
PCB-
=same as HRAP 3 (assumed)
Wiring-
-Buttons mounted on PCB instead of having own quick disconnects
=Unsure whether joystick is 5 pin harness or individual soldered on microswitches
USB Cable-
=USB 2.0
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
![HoriSoulcalibur5.jpg]()
Hori RAP Soul Caliber V
=Hori Real Arcade Pro Soul Caliber V
Release date: 2012
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
= Unique door over recessed mounting for Start button slides into pocket within case when opened.
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Top panel bolts can be removed with Allen key for easy installation of plexi and art.
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF
Buttons-
+Sanwa OBSF-30
PCB-
=Both common ground
Wiring-
=Buttons have quick disconnect wiring
=Joystick has 5-pin JST connector
USB Cable-
=USB 2.0
=Plastic door cord compartment
![Hori-RAP3-Tekken6-01.jpg]()
Hori RAP 3 Tekken 6
=Hori Real Arcade Pro. 3 Tekken 6
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=Black base
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
=Type of joystick unknown (Black balltop)
Buttons-
=Type of button unknown (Dark Hai color)
PCB-
=Same as HRAP 3 (Assumed)
Wiring-
=Unsure if buttons are quick disconnects or soldered to PCB
=Unsure if joystick is 5-pin harness or soldered to microswitches
USB Cable-
=USB 2.0
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
![Hori-TTT2P-01.jpg]()
Hori RAP 3 Tekken Tag 2 Prologue
=Hori Real Arcade Pro. 3 Tekken Tag 2 Prologue
+Last ever Original HRAP design produced
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
Metal Panels-
+Both top and bottom metal panels
-Two-point Joystick Mount (Seimtisu VF/JLF Wings), uses the JLF mounting plate points
+Namco NOIR Layout
Plexi/Art-
=No default plexi
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF-TP-8Y-SK
Buttons-
-HORI stock buttons
PCB-
=Same as HRAP 3
Wiring-
+Buttons are quick disconnects
+5-pin Joystick Harness
USB Cable-
=USB 2.0
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
Need PS3 version photo here
![ttt2%20hori_1.jpg]()
Hori RAP Tekken Tag Tournament 2
=Hori Real Arcade Pro Tekken Tag Tournament 2
Release date: 2011
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
= Unique door over recessed mounting for Start button slides into pocket within case when opened.
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Top panel bolts can be removed with Allen key for easy installation of plexi and art.
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF
Buttons-
+Sanwa OBSF-30
PCB-
=Both common ground
Wiring-
=Button s have quick disconnect wiring
=Joystick has 5-pin JST connector
USB Cable-
=USB 2.0
=Plastic doored cord compartment
Playstation 4 / Playstation 3
![Hori-HRAPv4-01.png]()
Hori RAP V4
=Hori Real Arcade Pro V4 Hayabusa for PS4 & PS3
SRKTT thread-
http://forums.shoryuken.com/discussion/189004/hori-hrap-v4-announced-compatible-with-ps3-and-ps4/p1
Case-
Hori Case (Same as RAPV3/RAPVX/UMvC3/DoA models for PS3/360)
=One main plastic base. Does not have individual plastic pieces.
=Sizes - Width = 430mm, Depth = 240mm, Height (including lever) = 125mm
=Weight (2.2kg)
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Default artwork can leave a sticky residue when removing
+Tek Innovations does have plexi option (Same as V3/VX non-Kai)
Bottom Padding/Feet-
=No padding
=Four small rubber feet
Joystick-
=Hori Hayabusa joystick
Buttons-
=Hori Kuro buttons
PCB-
=Common ground. Unsure if active high/low. Unsure if able to multi-mod without complications due to insufficient testing.
+Easy to remove main PCB from base
=Button signals/grounds, and USB cable are soldered to PCB while joystick connector and ribbon cables to Turbo/Home PCB are removable from main PCB
Wiring-
=Typical
USB Cable-
=Wire and cord compartment
Unanswered Questions Due to Insufficient Testing-
-Is the PCB possible to multi-mod with? We know it's common ground, but we don't have if is active high/low.
![Hori-HRAPv4SILENT-01.png]()
Hori RAP V4 Silent
=Hori Real Arcade Pro V4 Silent Hayabusa for PS4 & PS3
SRKTT thread-
http://forums.shoryuken.com/discussion/189004/hori-hrap-v4-announced-compatible-with-ps3-and-ps4/p1
(Same thread as non-silent version)
Case-
Hori Case (Same as RAPV3/RAPVX/UMvC3/DoA models for PS3/360)
=One main plastic base. Does not have individual plastic pieces.
=Sizes - Width = 430mm, Depth = 240mm, Height (including lever) = 125mm
=Weight (2.2kg)
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Default artwork can leave a sticky residue when removing
+Tek Innovations does have plexi option (Same as V3/VX non-Kai)
Bottom Padding/Feet-
=No padding
=Four small rubber feet
Joystick-
=Hori Hayabusa joystick with optical switches
Buttons-
=Hori Kuro buttons with silencer pads
PCB-
=Common ground. Unsure if active high/low. Unsure if able to multi-mod without complications due to insufficient testing.
+Easy to remove main PCB from base
-Button signals/grounds, and USB cable are soldered to PCB while joystick connector and ribbon cables to Turbo/Home PCB are removable from main PCB
Wiring-
=Typical
USB Cable-
=Wire and cord compartment
Unanswered Questions Due to Insufficient Testing-
=Is the PCB possible to multi-mod with? We know it's common ground, but we don't have if is active high/low.
![Hori-HRAP4KAI-01.png]()
Hori RAP 4 Kai
=Hori Real Arcade Pro 4 Kai for PS4 & PS3
SRKTT thread-
http://forums.shoryuken.com/discussion/195974/hrap4-kai-initial-impressions
(Same thread as HRAP 4 Kai/HRAP.V Hayabusa)
Case-
Hori Case (New form factor upgrade from RAPV3/RAPVX/RAPV4 style where buttons are now on the side instead of on top/face)
=One main plastic base. Does not have individual plastic pieces.
=Sizes: Width = 430mm, Depth = 237mm, Height (including lever) = 114mm
=Weight (2.2kg)
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=PS4 touch panel on back
Metal Panels-
+Both top and bottom metal panels
=RAP 4 Kai has Vewlix layout with wider spread between joystick and buttons
Plexi/Art-
=No default plexi
=Default artwork can leave a sticky residue when removing
=Undetermined whether a plexi via Tek Innovations for V3/VX would still fit properly. Even if changed, it's unlikely they wouldn't have a plexi for it in the near future.
Bottom Padding/Feet-
=Padding on bottom where stick sits on legs
=No feet
Joystick-
=Hori Hayabusa joystick
Buttons-
=Hori Kuro buttons
PCB-
=Common ground PCB (Same as HRAP 4 Kai/HRAP.V/DoA5LR)
=Multiple PCBs (main PCB, side PCB, touch screen)
=Touch screen PCB is connected to main PCB using a small ribbon cable
=Side PCB is connected to main PCB using two standard molex style connectors
=Joystick is connected to main PCB using a standard molex style connector
=Buttons are connected to main PCB by solder and glue
=USB cable is connected to main PCB by using a standard molex style connector
Wiring-
-Signal/Ground wires are soldered on to buttons
USB Cable-
=Wire and cord compartment
=Cable length (3m)
Unanswered Questions Due to Insufficient Testing-
=Is the PCB the same for both models of this body type?
=Is the PCB possible to multi-mod with? We know it's common ground, but we don't have if is active high/low.
![Hori-HRAP5-01.png]()
Hori RAP.V
=Hori Real Arcade Pro.V Hayabusa for PS4 & PS3
SRKTT thread-
http://forums.shoryuken.com/discussion/195974/hrap4-kai-initial-impressions
(Same thread as HRAP 4 Kai/HRAP.V Hayabusa)
Case-
Hori Case (New form factor upgrade from RAPV3/RAPVX/RAPV4 style where buttons are now on the side instead of on top/face)
=One main plastic base. Does not have individual plastic pieces.
=Sizes: Width = 430mm, Depth = 237mm, Height (including lever) = 114mm
=Weight (2.2kg)
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=PS4 touch panel on back
Metal Panels-
+Both top and bottom metal panels
=Vewlix layout with standard spread between joystick and buttons
Plexi/Art-
=No default plexi
=Default artwork can leave a sticky residue when removing
=Undetermined whether a plexi via Tek Innovations for V3/VX would still fit properly. Even if changed, it's unlikely they wouldn't have a plexi for it in the near future.
Bottom Padding/Feet-
=No padding
=Four small rubber feet
Joystick-
=Hori Hayabusa joystick
Buttons-
=Hori Kuro buttons
PCB-
=Common ground PCB (Same as HRAP 4 Kai/HRAP.V/DoA5LR)
=Multiple PCBs (main PCB, side PCB, touch screen)
=Touch screen PCB is connected to main PCB using a small ribbon cable
=Side PCB is connected to main PCB using two standard molex style connectors
=Joystick is connected to main PCB using a standard molex style connector
=Buttons are connected to main PCB by solder and glue
=USB cable is connected to main PCB by using a standard molex style connector
Wiring-
-Signal/Ground wires are soldered on to buttons
USB Cable-
=Wire and cord compartment
=Cable length (3m)
Unanswered Questions Due to Insufficient Testing-
=Is the PCB possible to multi-mod with? We know it's common ground, but we don't have if is active high/low.
![Hori-DoA5LR-01.png]()
Hori DoA5LR
=Hori Dead or Alive 5 Last Round for PS4 & PS3
(Not technically an HRAP as it has no "Real Arcade Pro" in the title, but uses same PCB and case as other HRAPs)
SRKTT thread (DoA5LR)-
http://forums.shoryuken.com/discussion/194638/hori-ps4-ps3-dead-or-alive-5-last-round-stick/p1
Case-
Hori Case (New form factor upgrade from RAPV3/RAPVX/RAPV4 style where buttons are now on the side instead of on top/face)
=One main plastic base. Does not have individual plastic pieces.
=Sizes: Width = 430mm, Depth = 237mm, Height (including lever) = 114mm
=Weight (2.2kg)
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=PS4 touch panel on back
=DoA5LR has an extra piece connected to front middle of case with analog sticks. Unsure if removable yet due to insufficient testing
Metal Panels-
+Both top and bottom metal panels
=Vewlix layout with standard spread between joystick and buttons
Plexi/Art-
=No default plexi
=Default artwork can leave a sticky residue when removing
=Undetermined whether a plexi via Tek Innovations for V3/VX would still fit properly. Even if changed, it's unlikely they wouldn't have a plexi for it in the near future.
Bottom Padding/Feet-
=No padding
=Four small rubber feet
Joystick-
=Hori Hayabusa joystick
Buttons-
=Hori Kuro buttons
=Signal/Ground wires are soldered on to buttons
PCB-
=Common ground PCB (Same as HRAP 4 Kai/HRAP.V/DoA5LR)
=Multiple PCBs (main PCB, side PCB, touch screen)
=Touch screen PCB is connected to main PCB using a small ribbon cable
=Side PCB is connected to main PCB using two standard molex style connectors
=Joystick is connected to main PCB using a standard molex style connector
=Buttons are connected to main PCB by solder and glue
=USB cable is connected to main PCB by using a standard molex style connector
Wiring-
=Typical
USB Cable-
=Wire and cord compartment
=Cable length (3m)
Unanswered Questions Due to Insufficient Testing-
-Is the PCB possible to multi-mod with? We know it's common ground, but we don't have if is active high/low.
![Hori-HRAP4VLX-01.png]()
Hori RAP4 Premium VLX
=Real Arcade Pro 4 Premium VLX Kuro for PS4 & PS3
SRKTT thread-
http://forums.shoryuken.com/discussion/195793/the-hori-ps4-vlx-thread/p1
Case-
Hori VLX Case (Same as VLX models for PS3/360)
=Sizes - Width = 570mm, Depth = 260mm, Height (including lever) = 140mm
=Weight (5.4kg/11.9lbs)
=Interior of case has plenty of space for mounting PCBs
=PS4 touch panel on back of case
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Default artwork can leave a sticky residue when removing
Bottom Padding/Feet-
=Padding
Joystick-
=Hori Hayabusa joystick
Buttons-
=Hori Kuro buttons
PCB-
=Insuffiecent testing
Wiring-
=Typical
USB Cable-
=Wire and cord compartment
=Cable length (3m/9.8ft)
Unanswered Questions Due to Insufficient Testing-
To Edit
-
IF YOU ARE ABLE TO HELP PROVIDE INFORMATION, PHOTOS, DETAILS, OR PERHAPS EVEN HELP DO RESEARCH USING THE LINKS AT THE BOTTOM OF THIS FIRST POST IN SPOILER TAGS AND REPORT BACK, IT IS MUCH APPRECIATED.
It's taken me a lot of time to gather this information up so far, put it in a neat format, find photos and resize etc. If you can volunteer to help for the good of all arcade stick lovers and SRK TT, please do.
First off, I've gotta shout out @Superking for the original post back in July 2005 and for the work he did in keeping track of info and data on the Hori RAP sticks at least up until the middle of the PS2 gen and some of the PS3/360 gen.
Below you'll see the info he organized reworked in a new format with more info and photos.
Original thread (39 pages of topic from July 2005 to mostly April 2012)
http://forums.shoryuken.com/discussion/13083/hori-real-arcade-pro-faq-for-all-versions/p1
Shoutouts to those who've helped provide information on this updated list that deserve credit for their contributions:
@hibachifinal @VirtualCosmic @Darksakul @NENDO @Digital- @quashpdarkman @N10248 @anzhar @Batsu
If you have general arcade stick questions, please ask in the "Absolute Question and Answer Thread v.3 (ASK YOUR QUESTIONS HERE!)" thread
http://forums.shoryuken.com/discussion/194283/absolute-question-and-answer-thread-v-3-ask-your-questions-here
If you desire information on other arcade sticks that are not listed here or want suggestions on what to buy, please visit the "What Stick/Controller Should I Buy? Read the Guide on Pg 1 Before Posting." thread
http://forums.shoryuken.com/discussion/137321/what-stick-controller-should-i-buy-read-the-guide-on-pg-1-before-posting/p1
There will be no tier list, and there will likely not be a "I SUGGEST YOU BUY ________ ARCADE STICK" info.
This is information for you to use to your advantage to make an independent decision based on what features you may or may not enjoy.
PLEASE PLEASE PLEASE do not come in to this thread and just ask "Which one should I buy?".
Use knowledge below to grow, think, and learn.
Listed in order of console:
Playstation 1 / Playstation 2
Hori RAP1
=Hori Real Arcade Pro (Mirror Finish)
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (2.6 kg or 5.7 lbs)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Mirror finish looks nice but is easily susceptible to scratches and fingerprints
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF-TP-8Y-SK
=Mounting a Seimitsu LS-32 is possible with modification, previous documentation lost to GeoCities
Buttons-
-Hori stock buttons
PCB-
=NEED INFO/DETAILS
Wiring-
+Quick disconnects for buttons allowing easy swap
=Unsure if joystick connection is 5 pin or soldered on individual microswitches
Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
Hori RAP CFJ
=Hori Capcom Fighting Jam
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF-TP-8Y-SK
Buttons-
-Hori stock buttons
PCB-
=NEED INFO/DETAILS
Wiring-
+Quick disconnects for buttons allowing easy swap
=Unsure if joystick connection is 5 pin or soldered on individual microswitches
USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
Hori RAP1
-Hori Real Arcade Pro Orange Amazon Exclusive
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF-TP-8Y-SK
Buttons-
-Hori stock buttons
PCB-
=NEED INFO/DETAILS
Wiring-
=NEED INFO/DETAILS
USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment
Unanswered Questions-
=What is the official title for this arcade stick from Hori?
=TO EDIT
Hori RAP1 SA
=Hori Real Arcade Pro Special Addition
=Special Addition also can be viewed as Hori's way of saying Sanwa (SA)
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
+Easy Top Panel access through Hex key
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF-TP-8Y-SK
Buttons-
-Sanwa OBSF-30RG and OBSF-24 in custom Vermilion color
PCB-
=NEED INFO/DETAILS
Wiring-
=NEED INFO/DETAILS
USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
Hori RAP1 SE
=Hori Real Arcade Pro Special Edition
=Special Edition also can be viewed as Hori's way of saying Seimitsu (SE)
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
+Easy Top Panel access through Hex key
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Seimitsu LS-32-01
Buttons-
-Seimitsu PS-14-GX
PCB-
=NEED INFO/DETAILS
Wiring-
=NEED INFO/DETAILS
USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
Hori AH1
=Hori Arcana Heart Arcade Stick
(unsure of official title since it's difficult to find data on now)
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (___________)
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
+Easy Top Panel access through Hex key
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF-TP-8Y-SK
Buttons-
-Hori stock buttons
PCB-
=NEED INFO/DETAILS
Wiring-
-Buttons mounted on PCB instead of having own quick disconnects
USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
Hori AH2
=Hori Arcana Heart 2 Arcade Stick
(unsure of official title since it's difficult to find data on now)
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (___________)
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
+Easy Top Panel access through Hex key
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
=NEED INFO/DETAILS
Buttons-
=NEED INFO/DETAILS
PCB-
=NEED INFO/DETAILS
Wiring-
-Buttons mounted on PCB instead of having own quick disconnects
USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
Hori FUC-LE
=Hori Real Arcade Pro Stick Fate/Unlimited Codes Limited Edition
(unsure of official title since it's difficult to find data on now)
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (___________)
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
=NEED INFO/DETAILS
Buttons-
=NEED INFO/DETAILS
PCB-
=NEED INFO/DETAILS
Wiring-
=NEED INFO/DETAILS
USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
Hori RAP2
=Hori Real Arcade Pro 2
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF-TP-8Y-SK
Buttons-
-Hori stock buttons
PCB-
=NEED INFO/DETAILS
Wiring-
=NEED INFO/DETAILS
USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
Hori RAP2 SA
=Hori Real Arcade Pro 2 Special Addition
=Special Addition also can be viewed as Hori's way of saying Sanwa (SA)
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
+Easy Top Panel access through Hex key
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF-TP-8Y-SK
Buttons-
-Sanwa OBSF-30 (Blue) and OBSF-24 (Dark Hai specifically made for this stick)
PCB-
=NEED INFO/DETAILS
Wiring-
=NEED INFO/DETAILS
USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
HRAP SCIII
=Hori Real Arcade Pro Soul Calibur III
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
=NEED INFO/DETAILS
Buttons-
-Hori stock buttons
PCB-
=NEED INFO/DETAILS
Wiring-
-Buttons mounted on PCB instead of having own quick disconnects
USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
HRAP Tekken 5 JP
=Hori Real Arcade Pro Tekken 5
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF-TP-8Y-SK
Buttons-
-Hori stock buttons
PCB-
=NEED INFO/DETAILS
Wiring-
=NEED INFO/DETAILS
USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
HRAP Tekken 5 10th Anniversary
=Hori Real Arcade Pro Tekken 10th Anniversary
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
-Hori
Buttons-
-Hori stock buttons
PCB-
=NEED INFO/DETAILS
Wiring-
=NEED INFO/DETAILS
USB Cable-
=PS2/PS1 connector exits plastic base
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
Playstation 3
HRAP3
=Hori Real Arcade Pro 3
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF-TP-8Y-SK
Buttons-
-Hori stock buttons
PCB-
=NEED INFO/DETAILS
Wiring-
=NEED INFO/DETAILS
USB Cable-
=PS3 cable exits base on back
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
HRAP3 SA
=Hori Real Arcade Pro. SA
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight ___________
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Nuts and bolts for top metal panel are difficult to remove and assemble
=Top loaders available via Tek Innovations allowing removal and assembly of top metal panel easier
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF-TP-8Y-SK
Buttons-
+Sanwa OBSF-30, OBSF-24
PCB-
=NEED INFO/DETAILS
Wiring-
=NEED INFO/DETAILS
USB Cable-
=PS3 cable exits base on back
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
Hori RAP 3 SE
=Hori Real Arcade Pro. 3 SE
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
Metal Panels-
+Both top and bottom metal panels
+Easy Top Panel access through Hex key
+Universal Joystick mount
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Seimtisu LS-32-01
Buttons-
+Seimitsu PS-14-G, PS-14-D
PCB-
=same as HRAP 3
Wiring-
+Buttons are quick disconnects
+5-pin Joystick Harness
USB Cable-
=USB 2.0
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
Hori RAP 3 Amazon JP
=Hori Real Arcade Pro Amazon.co.jp Edition
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
Metal Panels-
+Both top and bottom metal panels
+Easy Top Panel access through Hex key
+Universal Joystick mount
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF-TP-8Y-SK
Buttons-
-HORI stock buttons
PCB-
=same as HRAP 3
Wiring-
+Buttons are quick disconnects
+5-pin Joystick Harness
USB Cable-
=USB 2.0
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
Hori RAP N3 SA
=Hori Real Arcade Pro N3-SA
Release date: 2014
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=Unique door over recessed mounting for Start button slides into pocket within case when opened.
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Top panel bolts can be removed with Allen key for easy installation of plexi and art.
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF
Buttons-
+Sanwa OBSF-30
PCB-
=Common ground
Wiring-
=Buttons have quick disconnect wiring
=Joystick has 5-pin JST connector
USB Cable-
=USB 2.0
=Plastic door cord compartment
Hori RAP 3 BlazBlue
=Hori Real Arcade Pro. 3 BlazBlue
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
+Exclusive blue case
Metal Panels-
+Both top and bottom metal panels
-Two-point Joystick Mount (Seimtisu VF/JLF Wings)
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF-TP-8Y-SK
Buttons-
-HORI stock buttons
PCB-
=same as HRAP 3
Wiring-
-Buttons are PCB Mounted
+5-pin Joystick Harness
USB Cable-
=USB 2.0
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
Need PS3 version for photo
Hori RAP Dead or Alive 5
=Hori Real Arcade Dead or Alive 5
Release date: 2012
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
= Unique door over recessed mounting for Start button slides into pocket within case when opened.
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Top panel bolts can be removed with Allen key for easy installation of plexi and art.
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF
Buttons-
+Sanwa OBSF-30
PCB-
=Both common ground
Wiring-
=Buttons have quick disconnect wiring
=Joystick has 5-pin JST connector
USB Cable-
=USB 2.0
=Plastic door cord compartment
Hori RAP Mobile Suit Gundam: Extreme V.S.
=Hori Real Arcade Mobile Suit Gundam: Extreme V.S.
Release date: 2011
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=Unique door over recessed mounting for Start button slides into pocket within case when opened.
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Top panel bolts can be removed with Allen key for easy installation of plexi and art.
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF-TP-8Y-SK with dark blue balltop
Buttons-
+Sanwa OBSF-30
PCB-
=Common ground
Wiring-
=Buttons have quick disconnect wiring
=Joystick has 5-pin JST connector
USB Cable-
=USB 2.0
=Plastic door cord compartment
Hori RAP Mobile Suit Gundam: Extreme V.S. Full Boost
=Hori Real Arcade Pro AX S+G
Release date: 2014
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=Unique door over recessed mounting for Start button slides into pocket within case when opened.
=Full Boost version is the only version with transparent door over Start button.
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Top panel bolts can be removed with Allen key for easy installation of plexi and art.
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF
Buttons-
+Sanwa OBSF-30
PCB-
=Common ground
Wiring-
=Buttons have quick disconnect wiring
=Joystick has 5-pin JST connector
USB Cable-
=USB 2.0
=Plastic doored cord compartment
Hori SFIV
=Hori Street Fighter IV Arcade Stick
(unsure if this is "official" title)
(Does not have RAP in the name but is same build/parts)
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=Black case
Metal Panels-
+Both top and bottom metal panels
-Two-point Joystick Mount (Seimtisu VF/JLF Wings)
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Red/Black theme with Ryu & Ken
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF-TP-8Y-SK with Red Balltop
Buttons-
-HORI stock buttons (Red)
PCB-
=same as HRAP 3 (assumed)
Wiring-
-Buttons mounted on PCB instead of having own quick disconnects
=Unsure whether joystick is 5 pin harness or individual soldered on microswitches
USB Cable-
=USB 2.0
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
Hori RAP Soul Caliber V
=Hori Real Arcade Pro Soul Caliber V
Release date: 2012
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
= Unique door over recessed mounting for Start button slides into pocket within case when opened.
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Top panel bolts can be removed with Allen key for easy installation of plexi and art.
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF
Buttons-
+Sanwa OBSF-30
PCB-
=Both common ground
Wiring-
=Buttons have quick disconnect wiring
=Joystick has 5-pin JST connector
USB Cable-
=USB 2.0
=Plastic door cord compartment
Hori RAP 3 Tekken 6
=Hori Real Arcade Pro. 3 Tekken 6
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=Black base
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
=Type of joystick unknown (Black balltop)
Buttons-
=Type of button unknown (Dark Hai color)
PCB-
=Same as HRAP 3 (Assumed)
Wiring-
=Unsure if buttons are quick disconnects or soldered to PCB
=Unsure if joystick is 5-pin harness or soldered to microswitches
USB Cable-
=USB 2.0
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
Hori RAP 3 Tekken Tag 2 Prologue
=Hori Real Arcade Pro. 3 Tekken Tag 2 Prologue
+Last ever Original HRAP design produced
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
Metal Panels-
+Both top and bottom metal panels
-Two-point Joystick Mount (Seimtisu VF/JLF Wings), uses the JLF mounting plate points
+Namco NOIR Layout
Plexi/Art-
=No default plexi
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF-TP-8Y-SK
Buttons-
-HORI stock buttons
PCB-
=Same as HRAP 3
Wiring-
+Buttons are quick disconnects
+5-pin Joystick Harness
USB Cable-
=USB 2.0
=No cord compartment
Unanswered Questions Due to Insufficient Testing-
=TO EDIT
Need PS3 version photo here
Hori RAP Tekken Tag Tournament 2
=Hori Real Arcade Pro Tekken Tag Tournament 2
Release date: 2011
SRKTT thread-
=Unknown
Case-
RAP Base
=Weight (2.6 kg)
=Sizes - Width = 412mm, Depth = 243mm, Height (including lever) = 135mm
=One main plastic base. Does not have individual plastic pieces
+Same design/production base by major company for multiple consoles made swapping parts and getting 3rd party support easier
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
= Unique door over recessed mounting for Start button slides into pocket within case when opened.
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Plexi options available via Tek Innovations
=Top panel bolts can be removed with Allen key for easy installation of plexi and art.
Bottom Padding/Feet-
=No padding
=Four rubber feet
Joystick-
+Sanwa JLF
Buttons-
+Sanwa OBSF-30
PCB-
=Both common ground
Wiring-
=Button s have quick disconnect wiring
=Joystick has 5-pin JST connector
USB Cable-
=USB 2.0
=Plastic doored cord compartment
Playstation 4 / Playstation 3
Hori RAP V4
=Hori Real Arcade Pro V4 Hayabusa for PS4 & PS3
SRKTT thread-
http://forums.shoryuken.com/discussion/189004/hori-hrap-v4-announced-compatible-with-ps3-and-ps4/p1
Case-
Hori Case (Same as RAPV3/RAPVX/UMvC3/DoA models for PS3/360)
=One main plastic base. Does not have individual plastic pieces.
=Sizes - Width = 430mm, Depth = 240mm, Height (including lever) = 125mm
=Weight (2.2kg)
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Default artwork can leave a sticky residue when removing
+Tek Innovations does have plexi option (Same as V3/VX non-Kai)
Bottom Padding/Feet-
=No padding
=Four small rubber feet
Joystick-
=Hori Hayabusa joystick
Buttons-
=Hori Kuro buttons
PCB-
=Common ground. Unsure if active high/low. Unsure if able to multi-mod without complications due to insufficient testing.
+Easy to remove main PCB from base
=Button signals/grounds, and USB cable are soldered to PCB while joystick connector and ribbon cables to Turbo/Home PCB are removable from main PCB
Wiring-
=Typical
USB Cable-
=Wire and cord compartment
Unanswered Questions Due to Insufficient Testing-
-Is the PCB possible to multi-mod with? We know it's common ground, but we don't have if is active high/low.
Hori RAP V4 Silent
=Hori Real Arcade Pro V4 Silent Hayabusa for PS4 & PS3
SRKTT thread-
http://forums.shoryuken.com/discussion/189004/hori-hrap-v4-announced-compatible-with-ps3-and-ps4/p1
(Same thread as non-silent version)
Case-
Hori Case (Same as RAPV3/RAPVX/UMvC3/DoA models for PS3/360)
=One main plastic base. Does not have individual plastic pieces.
=Sizes - Width = 430mm, Depth = 240mm, Height (including lever) = 125mm
=Weight (2.2kg)
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Default artwork can leave a sticky residue when removing
+Tek Innovations does have plexi option (Same as V3/VX non-Kai)
Bottom Padding/Feet-
=No padding
=Four small rubber feet
Joystick-
=Hori Hayabusa joystick with optical switches
Buttons-
=Hori Kuro buttons with silencer pads
PCB-
=Common ground. Unsure if active high/low. Unsure if able to multi-mod without complications due to insufficient testing.
+Easy to remove main PCB from base
-Button signals/grounds, and USB cable are soldered to PCB while joystick connector and ribbon cables to Turbo/Home PCB are removable from main PCB
Wiring-
=Typical
USB Cable-
=Wire and cord compartment
Unanswered Questions Due to Insufficient Testing-
=Is the PCB possible to multi-mod with? We know it's common ground, but we don't have if is active high/low.
Hori RAP 4 Kai
=Hori Real Arcade Pro 4 Kai for PS4 & PS3
SRKTT thread-
http://forums.shoryuken.com/discussion/195974/hrap4-kai-initial-impressions
(Same thread as HRAP 4 Kai/HRAP.V Hayabusa)
Case-
Hori Case (New form factor upgrade from RAPV3/RAPVX/RAPV4 style where buttons are now on the side instead of on top/face)
=One main plastic base. Does not have individual plastic pieces.
=Sizes: Width = 430mm, Depth = 237mm, Height (including lever) = 114mm
=Weight (2.2kg)
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=PS4 touch panel on back
Metal Panels-
+Both top and bottom metal panels
=RAP 4 Kai has Vewlix layout with wider spread between joystick and buttons
Plexi/Art-
=No default plexi
=Default artwork can leave a sticky residue when removing
=Undetermined whether a plexi via Tek Innovations for V3/VX would still fit properly. Even if changed, it's unlikely they wouldn't have a plexi for it in the near future.
Bottom Padding/Feet-
=Padding on bottom where stick sits on legs
=No feet
Joystick-
=Hori Hayabusa joystick
Buttons-
=Hori Kuro buttons
PCB-
=Common ground PCB (Same as HRAP 4 Kai/HRAP.V/DoA5LR)
=Multiple PCBs (main PCB, side PCB, touch screen)
=Touch screen PCB is connected to main PCB using a small ribbon cable
=Side PCB is connected to main PCB using two standard molex style connectors
=Joystick is connected to main PCB using a standard molex style connector
=Buttons are connected to main PCB by solder and glue
=USB cable is connected to main PCB by using a standard molex style connector
Wiring-
-Signal/Ground wires are soldered on to buttons
USB Cable-
=Wire and cord compartment
=Cable length (3m)
Unanswered Questions Due to Insufficient Testing-
=Is the PCB the same for both models of this body type?
=Is the PCB possible to multi-mod with? We know it's common ground, but we don't have if is active high/low.
Hori RAP.V
=Hori Real Arcade Pro.V Hayabusa for PS4 & PS3
SRKTT thread-
http://forums.shoryuken.com/discussion/195974/hrap4-kai-initial-impressions
(Same thread as HRAP 4 Kai/HRAP.V Hayabusa)
Case-
Hori Case (New form factor upgrade from RAPV3/RAPVX/RAPV4 style where buttons are now on the side instead of on top/face)
=One main plastic base. Does not have individual plastic pieces.
=Sizes: Width = 430mm, Depth = 237mm, Height (including lever) = 114mm
=Weight (2.2kg)
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=PS4 touch panel on back
Metal Panels-
+Both top and bottom metal panels
=Vewlix layout with standard spread between joystick and buttons
Plexi/Art-
=No default plexi
=Default artwork can leave a sticky residue when removing
=Undetermined whether a plexi via Tek Innovations for V3/VX would still fit properly. Even if changed, it's unlikely they wouldn't have a plexi for it in the near future.
Bottom Padding/Feet-
=No padding
=Four small rubber feet
Joystick-
=Hori Hayabusa joystick
Buttons-
=Hori Kuro buttons
PCB-
=Common ground PCB (Same as HRAP 4 Kai/HRAP.V/DoA5LR)
=Multiple PCBs (main PCB, side PCB, touch screen)
=Touch screen PCB is connected to main PCB using a small ribbon cable
=Side PCB is connected to main PCB using two standard molex style connectors
=Joystick is connected to main PCB using a standard molex style connector
=Buttons are connected to main PCB by solder and glue
=USB cable is connected to main PCB by using a standard molex style connector
Wiring-
-Signal/Ground wires are soldered on to buttons
USB Cable-
=Wire and cord compartment
=Cable length (3m)
Unanswered Questions Due to Insufficient Testing-
=Is the PCB possible to multi-mod with? We know it's common ground, but we don't have if is active high/low.
Hori DoA5LR
=Hori Dead or Alive 5 Last Round for PS4 & PS3
(Not technically an HRAP as it has no "Real Arcade Pro" in the title, but uses same PCB and case as other HRAPs)
SRKTT thread (DoA5LR)-
http://forums.shoryuken.com/discussion/194638/hori-ps4-ps3-dead-or-alive-5-last-round-stick/p1
Case-
Hori Case (New form factor upgrade from RAPV3/RAPVX/RAPV4 style where buttons are now on the side instead of on top/face)
=One main plastic base. Does not have individual plastic pieces.
=Sizes: Width = 430mm, Depth = 237mm, Height (including lever) = 114mm
=Weight (2.2kg)
=Interior of case has plenty of space for mounting PCBs
=Must open from bottom (Which voids the warranty)
=PS4 touch panel on back
=DoA5LR has an extra piece connected to front middle of case with analog sticks. Unsure if removable yet due to insufficient testing
Metal Panels-
+Both top and bottom metal panels
=Vewlix layout with standard spread between joystick and buttons
Plexi/Art-
=No default plexi
=Default artwork can leave a sticky residue when removing
=Undetermined whether a plexi via Tek Innovations for V3/VX would still fit properly. Even if changed, it's unlikely they wouldn't have a plexi for it in the near future.
Bottom Padding/Feet-
=No padding
=Four small rubber feet
Joystick-
=Hori Hayabusa joystick
Buttons-
=Hori Kuro buttons
=Signal/Ground wires are soldered on to buttons
PCB-
=Common ground PCB (Same as HRAP 4 Kai/HRAP.V/DoA5LR)
=Multiple PCBs (main PCB, side PCB, touch screen)
=Touch screen PCB is connected to main PCB using a small ribbon cable
=Side PCB is connected to main PCB using two standard molex style connectors
=Joystick is connected to main PCB using a standard molex style connector
=Buttons are connected to main PCB by solder and glue
=USB cable is connected to main PCB by using a standard molex style connector
Wiring-
=Typical
USB Cable-
=Wire and cord compartment
=Cable length (3m)
Unanswered Questions Due to Insufficient Testing-
-Is the PCB possible to multi-mod with? We know it's common ground, but we don't have if is active high/low.
Hori RAP4 Premium VLX
=Real Arcade Pro 4 Premium VLX Kuro for PS4 & PS3
SRKTT thread-
http://forums.shoryuken.com/discussion/195793/the-hori-ps4-vlx-thread/p1
Case-
Hori VLX Case (Same as VLX models for PS3/360)
=Sizes - Width = 570mm, Depth = 260mm, Height (including lever) = 140mm
=Weight (5.4kg/11.9lbs)
=Interior of case has plenty of space for mounting PCBs
=PS4 touch panel on back of case
Metal Panels-
+Both top and bottom metal panels
Plexi/Art-
=No default plexi
=Default artwork can leave a sticky residue when removing
Bottom Padding/Feet-
=Padding
Joystick-
=Hori Hayabusa joystick
Buttons-
=Hori Kuro buttons
PCB-
=Insuffiecent testing
Wiring-
=Typical
USB Cable-
=Wire and cord compartment
=Cable length (3m/9.8ft)
Unanswered Questions Due to Insufficient Testing-
To Edit
-